Del Mar Photonics
AOTF Infrared Spectrometer to measure lactose, fat and proteins in milk - request a quote
The Wisconsin Cheese Industry Conference returns to the La Crosse Center in
La Crosse, Wisconsin, April 13-14, 2011.
Here, more than 1,200 cheese industry leaders from around the nation will gather to gain information about the latest in technology, product safety, marketing and dairy issues affecting our industry. The conference, co-sponsored by Wisconsin Cheese Makers Association (WCMA) and the Wisconsin Center for Dairy Research (WCDR), is the cheese, butter and whey industry's best seminar and technology update.
what can you tell about potential use of AOTF to measure lactose, fat and
proteins in milk?
Obviosly we make laboratory analisys such as Gerber method, but sometimes we use Ross - Gotlieb (fat), Kjeldar (proteins) as reference method.
Del Mar Photonics reply:
Yes, it is possible, see for example, publication below. Obtaining the spectrum takes a few seconds. It could be on-line, with a liquid flow-cell. One of the systems was built for the US Department of Agriculture.
Near infrared spectroscopy for biomonitoring: cow milk composition
measurement in a spectral region from 1,100 to 2,400 nanometers (pdf)
R. Tsenkova*, S. Atanassova†, K. Itoh‡, Y. Ozaki§, and K. Toyoda*
*Department of Environmental Information and Bio-production Engineering, Kobe University, Kobe 657, Japan;
†Department of Mathematics and Physics, Thracian University, Stara Zagora 6000, Bulgaria;
‡Laboratory of Agricultural Process Engineering, Hokkaido University, Sapporo 060, Japan; and
§Department of Chemistry, Kwansei Gakuin University, Nishinomiya 662, Japan
ABSTRACT: The potential of near infrared spectroscopy (NIRS; 1,100 to 2,400 nm) to measure fat, total protein, and lactose content of nonhomogenized milk during milking and the inﬂuence of individual characteristics of each cow’s milk on the accuracy of determination were studied. Milk fractions were taken during milking, twice per month, for 6 mo. Samples were taken every 2nd and 4th wk at the morning and the evening milkings. Teatcups were removed at each 3 L of milk yield as determined with a fractional sampling milk meter. A total of 260 milk samples were collected and analyzed with an NIRSystem 6500 spectrophotometer with 1-mm sample thickness. Partial least squares (PLS) regression was used to develop calibration models for the examined milk components. The comparison with the reference method was based on standard error of cross validation (SECV). The obtained SECV varied from .107 to .138% for fat content, from .092 to .125% for total protein, and from .066 to .096% for lactose content, and the accuracy of the reference method (AOAC, 1990, method No 972.16) was .05% for all measured milk components. The obtained models had lower SECV when an individual cow’s spectral data were used for calibration. The reduction of SECV for each cow’s individual calibration, when compared with SECV for the set of all samples, differed with the different constituents. For fat content determination, the reduction reached 22.46%, for protein 26.40%, and for lactose 31.25%. This phenomena was investigated and explained by principle component analysis (PCA) and by comparing loading of PLS factors that account for the most spectral variations for each cow and the measured milk components, respectively. The results of this study indicated that NIRS (1,100 to 2,500 nm, 1-mm sample thickness) was satisfactory for nonhomogenized milk compositional analysis of milk fractions taken in the process of milking
Key Words: Milk, Fat, Protein, Lactose, Spectroscopy
AOTF Infrared Spectrometer -
request a quote
Del Mar Photonics offer a handheld infrared spectrometer based on the acousto-optic tunable filter (AOTF). This instrument is about the size and weight of a video camera, and can be battery operated. This unique, patented device is all solid-state with no moving parts. It has been sold for a wide variety of applications such as liquid fuel analysis, pharmaceutical analysis, gas monitoring and plastic analysis.
• High Speed
• NO moving parts
• Fiber Probe Option
• Infrared (1.2 – 2.5 µm)
• Diffuse reflectance and transmission
• Plastics identification RAVEN – Portable Plastic Identifier
• Pharmaceutical analysis
• Environmental Monitoring
• Research & Development
• Liquid fuel analysis
• Gas monitoring
Del Mar Photonics develop and supply dedicated AOTF Spectrometers. Send us the identification problem that you want to solve and we'll estimate suitability of AOTF technology for the job.
Del Mar Photonics, Inc.
4119 Twilight Ridge
San Diego, CA 92130
tel: (858) 876-3133
fax: (858) 630-2376